If they are unknown, type the following commands, each followed by an Enter to execute them. If the previous step of repairing Windows didn’t help, type bcdedit in the Command Prompt, to see the values for the Windows Boot Manager.Note that you might need to repeat this step multiple times in case it fails. The StartRep.exe utility corrects boot environment values and should fix the BCD error. Once inside the Command Prompt, type the commands below, followed by an Enter on your keyboard to execute them.Use steps 1 through 3 from the previous method to get to the Command Prompt of the recovery drive.Boot from the recovery drive, and follow the instructions below. This method will also repair your OS with the command prompt of the recovery drive, and you should be able to boot into Windows without facing the issue again. Method 2: Repair your OS with the recovery drive Reboot your computer, and it should boot up just fine, without facing the issue again.When the Command Prompt opens, type the following commands, pressing Enter on your keyboard after each one of them:.
In the Troubleshoot screen, click Advanced Options, and click on Command Prompt.In the lower-left corner, click on Repair your computer, and choose to Troubleshoot from the Choose an option screen.In the Windows Setup dialog box, set everything to the appropriate values, select your language and click.Once the computer is booted from the recovery drive, use the following steps to rebuild the BCD: If you’ve configured your BIOS with the steps above, you can do that by pressing any key once the prompt appears on your display. To do this, you will need to boot your computer from the recovery drive. Method 1: Rebuild the Boot Configuration Data Once inside, navigate to the Boot Use the instructions found within the BIOS to change your boot order, and set either the CD-ROM or the USB port to be the first device, depending on whether your recovery drive is a CD or a flash drive.You can do an online search on how to enter BIOS, followed by your computer model. This key is usually Esc, Delete, F2, F8, F10, F12 or Backspace, depending on the manufacturer. Enter the BIOS or UEFI settings by pressing your motherboard manufacturer’s designated key before Windows boots.You will also need to boot into your BIOS to change the boot order and make your PC boot from the recovery drive instead of your hard drive.
0 kommentar(er)
